Hobby Boss 1/48 F6F-5N Hellcat

Hobby Boss 1/48 F6F-5N Hellcat Review

The Grumman F6F Hellcat was a carrier-based fighter aircraft developed to replace the earlier F 4F Wildcat in United States Navy service. It was a completely new design powered by a 2,000 hp Pratt & Whitney R-2800. The Hellcat was the first Navy fighter for which the design took into account lessons from combat with the Japanese Zero. The Hellcat proved to be the most successful aircraft in naval history, destroying 5,271 aircraft while in service with the U.S. Navy and U.S. Marine Corps

Probe Set,Stainless

Probe Set,Stainless Review

Probe Set,Stainless Feature

• Squadron Modeling Tools

Stainless steel surgical quality probes with needle sharp points for positioning, adjusting, manipulating tiny parts in hard to reach places.

M706 Commando Armored Vehicle 1-35 Hobby Boss

M706 Commando Armored Vehicle 1-35 Hobby Boss Review

M706 Commando Armored Vehicle 1-35 Hobby Boss Feature

• Assembly Required Skill Level 2. Ages 10 and up.

1-35 Scale. Highly detailed kit by Hobby boss decals and instructions included. Skill level 2.

Star Wars Bend-Ems Darth Vader Figure with Limited Edition Trading Card

Star Wars Bend-Ems Darth Vader Figure with Limited Edition Trading Card Review

Star Wars Bend-Ems Darth Vader Figure with Limited Edition Trading Card Feature

• Starwars bendable action figure
• Collector Card included

Bendable action figure

Landing Skid and Battery Mount Set: BMCX/2

Landing Skid and Battery Mount Set: BMCX/2 Review

Landing Skid and Battery Mount Set: BMCX/2 Feature

• Compatible with E-Flite Blade MCX Indoor RC Helicopters

This replacement landing skid and battery box set for the E-Flite Blade mCX RC Helicopter is a factory replacement part. Specifications: * Material: black plastic * Quantity: 1 piece

Builder's Cutting Mat 9x12" w/Hobby Knife

Builder's Cutting Mat 9x12" w/Hobby Knife Review

"This is the Hobbico 9""x12"" (228mm x 305mm) Builder's Cutting Mat with the Hobbico #1 Modeling Knife. FEATURES: Builder's Mat Durable three-layer construction provides a firm base for any cutting job Green non-reflective self healing surface Many handy markings printed on the surface

Drill Bit #56 (12)

Drill Bit #56 (12) Review

Drill Bit #56 (12) Feature

• Excel Hobby Tools

Drill Bit #56 (12)

Paasche Size 1 Aircap for TG Airbrush

Paasche Size 1 Aircap for TG Airbrush Review

Paasche Size 1 Aircap for TG Airbrush Feature

• .25mm aircap
• Made From nickel Silver
• Made in the USA

Size 1 aircap for TG airbrush

UH-34D Choctaw Helicopter 1-72 by Hobby Boss

UH-34D Choctaw Helicopter 1-72 by Hobby Boss Review

UH-34D Choctaw Helicopter 1-72 by Hobby Boss Feature

• Plastic Model Assembly required!
• Glue and paint sold separately

1-72 Scale. New kit from Hobby Boss, each kit features recessed panel lines, decals and instructions. Colorful box Art. Skill level 2.

Rc Nitro Fuel Sidewinder Team Stryke 30% Nitro Fuel (1 Quart) Truggy, Buggy,cars, Monster Trucks. Hobby Fuel

Rc Nitro Fuel Sidewinder Team Stryke 30% Nitro Fuel (1 Quart) Truggy, Buggy,cars, Monster Trucks. Hobby Fuel Review

Rc Nitro Fuel Sidewinder Team Stryke 30% Nitro Fuel (1 Quart) Truggy, Buggy,cars, Monster Trucks. Hobby Fuel Feature

• No need for after run oil
• Contains rust inhibitor and Anti-oxidant for resting engines
• Top quailty raw materials
• Non-Foaming agent
• Wetting Agent

DO NOT USE AFTER RUN OILS! Morgan fuel contains a rust inhibitor and an anti-oxidant for resting engines. Contains all top quality raw materials: Film strength Anti-oxidants Igniters Detergents Plus the following additional qualities. Non-Foaming agent: Keeps foam to a minimum, allowing longer, more consistant runs. Wetting Agent: Allows lubricant package to flow more evenly into bearings, creating more power from less friction. Makes engine run cooler so you can tune your engine leaner for more speed without the engine over heating. Sidwinder Team Stryke 30% Nitro Fuel from Morgan Fuels. Morgan Fuels has been blending Nitro Fuel for R/C applications for over 35 years, and have multiple World Championships and National Titles under their belt. Team Stryke fuel contains just the right amount of lubrication to create maximum power, maximum run time and decrease overall running temperatures for optimum performance.

1/35 German VK4502 (P) Hintern

1/35 German VK4502 (P) Hintern Review

The Porsche Type-180 design [Designated VK 45.02(P)] was based on the earlier VK 45.02(P) design but mounting the 8.8cm L/71 gun on a much modified hull. Two versions were proposed, with turrets to the front(Vorne), or to the rear(Hinten), however only the former was proceeded with, and the construction of three prototypes was underway by February 1943.

The turret and guns were designed by Krupp, the distinctively shaped ‘P2-Turm’ turrets which were designed for these ve1hicles have since been called ‘Porsche’ turrets. As production of these had already started the first 50 KingTiger were fitted with these.

Unfortunately the large armoured ‘lip’ surrounding the turret ring on the Type-180 was not a feature of the Henschel design and resulted in a major shot trap below the mantlet. All later production King Tiger vehicles used the H3-Turm turret, commonly know as the ‘Henschet’ turret.

It seems that one of the Porsche Type-180 vehicles may have been in operation since a Porsche Tiger with an 8.8cm L/71 gun is listed as part of the Panzer Kompanie Kummersdorf on March 1945. Virtually all operational Tiger II tanks, and prototypes were used at the end of the war

Maisto R/C 1:24 Audi R8 V10 2009

Maisto R/C 1:24 Audi R8 V10 2009 Review

Maisto R/C 1:24 Audi R8 V10 2009 Feature

• 1:24 Scale Radio Control Audi R8 V10
• Multiple frequencies marked on package so two cars can be driven simultaneously
• Dashboard hand controller
• Requires 3 AA batteries for vehicle and 1 9V for controller
• Join the Maisto Radio Control Revolution today

The design and execution make this 09 Audi R8 V10 from Maisto look like a die-cast replica, but the fast-action, full force speed bring home the radio control fun. Includes dashboard hand controller with assorted multiple frequencies.

Hawk 1/4 scale 426 Dodge Street Hemi engine diecast model kit

Hawk 1/4 scale 426 Dodge Street Hemi engine diecast model kit Review

Hawk 1/4 scale 426 Dodge Street Hemi engine diecast model kit Feature

• Detailed repica
• Prepainted
• Diecast parts
• Stand included
• Easy to assemble

Legendary muscle! Dodge 426 HEMI Engine Scale Model Kit by Hawk. FUN, PRICED LESS! An exacting diecast replica of the legendary 426 V-8 big-block HEMI engine. You can almost feel the rumble of raw horsepower. The HEMI rules as king of muscle! Now dive in to assemble this detailed 1/4-scale Kit by Hawk, America's oldest model company. Details: Over 125 parts, some chrome finish; Has rotating crankshaft, headers, intake manifold and valve covers; Measures 9 1/2 x 7 3/4 x 9"h. Weighs 2 lbs. 4 ozs.; Includes display base; Some plastic parts. Minor gluing and small Phillips screwdriver required (not included). Instructions in English and French. For ages 12 and up. Let the good times roar. Order Now! HEMI Engine Kit by Hawk

USB Flight Sim Module Cable: F

USB Flight Sim Module Cable: F Review

USB Flight Sim Module Cable: F Feature

• One End: Square micro Futaba transmitter trainer interface style plug
• Other End: Windows USB Plug. Length: 6ft
• Compatible with Windows 95/98/ME/2000/XP
• Not Compatible With: Mac, Windows Vista
• Download the free FMS software at http://n.ethz.ch/student/mmoeller/fms/index_e.html

FMS flight simulator rc transmitter to Windows PC USB interface cable. Futaba-style square micro plug version on one end and the other end is USB. Manufactured by Grand Wing Servo-Tech, this r/c flight sim interface cable will connect your Futaba rc transmitter (tx) to your Windows PC so you can fly virtual models for all your favorite remote controlled airplanes and helicopters. Not compatible with Mac. Compatible with Windows 95/98/ME/2000/XP only. Not compatible with Windows Vista. The FMS flight simulator software is a free download from the FMS Web site. Futaba Transmitter to Windows PC USB Interface Cable * One End: Square micro Futaba transmitter trainer interface style plug * Other End: Windows USB Plug * Compatible with Windows 95/98/ME/2000/XP * Not Compatible With: Mac, Windows Vista * Manufacturer Model Number: GWFSM002C * Manufacturer Serial Number: FSMU05986

German PzKpfw KV-2 754(R) Tank 1-48 Hobby Boss

German PzKpfw KV-2 754(R) Tank 1-48 Hobby Boss Review

German PzKpfw KV-2 754(R) Tank 1-48 Hobby Boss Feature

• Assembly Required Skill Level 2. Ages 10 and up.

1-48 Scale. Nice kit by Hobby Boss complete recessed panel lines, decals and instructions. Skill level 2.

Lighthouse 16-Black Page Stamp Stockbook HobbyS2/8 Green

Lighthouse 16-Black Page Stamp Stockbook HobbyS2/8 Green Review

Lighthouse 16-Black Page Stamp Stockbook HobbyS2/8 Green Feature

• This stamp stockbook includes 16 black pages (8 double sided).
• Each page is made of acid-free archival stock paper with 6 clear strips to hold your stamps
• Single glassine interleaving is provided between each page.
• Made in Germany.

This stockbook is green hard cover with a stamp motif and features a rigid binding. The exterior measures 6-1/2" x 9" (170mm x 225mm).

Tamiya Modeler's Knife Pro

Tamiya Modeler's Knife Pro Review

Tamiya Modeler's Knife Pro Feature

• Tamiya Item#: 74098
• Modeler's Knife Pro x 1pc
• Straight blade (0.5mm thick) x 3pcs. This blade is extremely sharp and perfect for precision cutting
• Curved blade (0.45mm thick) x 2pcs. Even with soft fabrics, this blade can acheive smooth cuts
• Chisel blade (0.55mm thick) x 2pcs

Tamiya is proud to introduce the latest professional knife for modelers which is compatible with four types of blades and is ideal for precision tasks. The body is made from a durable fiberglass-reinforced plastic and features an elastomer grip and a metal clasp to secure the blade. The included blades are made from a high-grade tool steel alloy and can be used for hobby, craft, and art applications. Specs & Features: Modeler's Knife Pro x 1pc. Straight blade (0.5mm thick) x 3pcs. This blade is extremely sharp and perfect for precision cutting. Curved blade (0.45mm thick) x 2pcs. Even with soft fabrics, this blade can achieve smooth cuts. Chisel blade (0.55mm thick) x 2pcs. This blade is great for chiseling and removing protrusions from flat surfaces. Replacement blades are separately available. (See the next page for details.) Metal chuck (black) x 1pc. Also compatible with Tamiya Item #: 74075 Modeler's Knife Replacement Blade (25pcs.).